XH Template to XH1.5
XH Template to XH1.5
Hi all,
Ive not been active here for the past few months, (SORRY!)
However upon loking at my bookmarks and ending up on the forums i came across XH1.5RC, so ive uploaded it straight away to a test server and started testing away, unfortunately as always with my templates i have some strange errors occuring immediately, i will post an image below to show. Dont need anyone looking into this too much as i am happy (ish) with XH1.4.2, but has anyone else come across anything like this? FYI this is the exact same template on the same host, with same content and pagedata file. only thing missing is a few plugins plus its a different version of XH.
[ external image ]
Kind Regards
Flukey
Ive not been active here for the past few months, (SORRY!)
However upon loking at my bookmarks and ending up on the forums i came across XH1.5RC, so ive uploaded it straight away to a test server and started testing away, unfortunately as always with my templates i have some strange errors occuring immediately, i will post an image below to show. Dont need anyone looking into this too much as i am happy (ish) with XH1.4.2, but has anyone else come across anything like this? FYI this is the exact same template on the same host, with same content and pagedata file. only thing missing is a few plugins plus its a different version of XH.
[ external image ]
Kind Regards
Flukey
RJS Electronics Ltd - LED Push Switches, LCD Programmable Keys, Anti Vandal Push Buttons, Relays, Custom Cable Assemblies
Visit my Web Hosting / Design website here - www.flukedesigns.co.uk
Visit my Web Hosting / Design website here - www.flukedesigns.co.uk
Re: XH Template to XH1.5
Hi Flukey,
The problem with the template has IMO nothing to do with the new version. It's a problem with the template. If you have a look at it, you'll see that most images (mainly used for styling the corners and borders) are included by using
to be portable, but some are included by using an absolute URL. It seems those images (e.g. http://www.rjselectronics.com/templates ... _r1_c3.jpg) can't be accessed from the new installation. It might be best to change those absolute URLs to portable ones using $pth['folder']['templateimages'].
Christoph
That's no problem. Nobody is expected or even required to be around in the forum everytime.flukey92 wrote:Ive not been active here for the past few months, (SORRY!)
The problem with the template has IMO nothing to do with the new version. It's a problem with the template. If you have a look at it, you'll see that most images (mainly used for styling the corners and borders) are included by using
Code: Select all
$pth['folder']['templateimages']
Christoph
Christoph M. Becker – Plugins for CMSimple_XH
Re: XH Template to XH1.5
Problem solved
My test server was in a location after the domain name ie. "www.dotcom.com/TESTSERVER"
i have changed it to "TESTSERVER.dotcom.com"
and this has solved the template issue immediately
KR
flukey
My test server was in a location after the domain name ie. "www.dotcom.com/TESTSERVER"
i have changed it to "TESTSERVER.dotcom.com"
and this has solved the template issue immediately
KR
flukey
RJS Electronics Ltd - LED Push Switches, LCD Programmable Keys, Anti Vandal Push Buttons, Relays, Custom Cable Assemblies
Visit my Web Hosting / Design website here - www.flukedesigns.co.uk
Visit my Web Hosting / Design website here - www.flukedesigns.co.uk
Re: XH Template to XH1.5
didnt see your post Christoph
I will check that now though to let everyone know whether it solves the issues and i can have it after the domain name instead of a subdomain
kr
flukey
I will check that now though to let everyone know whether it solves the issues and i can have it after the domain name instead of a subdomain
kr
flukey
RJS Electronics Ltd - LED Push Switches, LCD Programmable Keys, Anti Vandal Push Buttons, Relays, Custom Cable Assemblies
Visit my Web Hosting / Design website here - www.flukedesigns.co.uk
Visit my Web Hosting / Design website here - www.flukedesigns.co.uk
Re: XH Template to XH1.5
Hey all, not sure where i should post this so added onto the end of my current topic.
I have some strange malfunciton in XH1.5 where if i search for anything in the search bar and press search it downloads my companies Ts & Cs PDF, i realised it was because i had a page linking redirecting to it and to get around it i deleted the page. My search worked fine for a few hours now it redirects me to another H1 page no matter what search term i use.
Has anyone else come across this yet???
-flukey
I have some strange malfunciton in XH1.5 where if i search for anything in the search bar and press search it downloads my companies Ts & Cs PDF, i realised it was because i had a page linking redirecting to it and to get around it i deleted the page. My search worked fine for a few hours now it redirects me to another H1 page no matter what search term i use.
Has anyone else come across this yet???
-flukey
RJS Electronics Ltd - LED Push Switches, LCD Programmable Keys, Anti Vandal Push Buttons, Relays, Custom Cable Assemblies
Visit my Web Hosting / Design website here - www.flukedesigns.co.uk
Visit my Web Hosting / Design website here - www.flukedesigns.co.uk
Re: XH Template to XH1.5
Hi Flukey,
thanks for pointing this issue out. I could easily reproduce the problem: if any page is redirected by the page params plugin, the search will always end up on the target of the first relocation. So I guess you have another page redirected to somewhere. Just found it: "Slide Potentiometer" redirects to "Other Products:Motorised Faders".
This issue will be fixed in the final release of CMSimple_XH 1.5. Hope you wait some days(?)
Christoph
thanks for pointing this issue out. I could easily reproduce the problem: if any page is redirected by the page params plugin, the search will always end up on the target of the first relocation. So I guess you have another page redirected to somewhere. Just found it: "Slide Potentiometer" redirects to "Other Products:Motorised Faders".
This issue will be fixed in the final release of CMSimple_XH 1.5. Hope you wait some days(?)
Christoph
Christoph M. Becker – Plugins for CMSimple_XH
Re: XH Template to XH1.5
Hey Christoph!
Thanks very much once again for you help,
Unfortunately many of my pages link in this way, because i deal with worldwide customers who refer to the same product in 1-10 different names rather than reproducing the same content i just use the h1 tags to hyperlink. for example (i deal with switches not clothes) but in england we refer to trousers as "trousers" whereas some americans refer to them as "pants"
flukey
p.s.
in the meanwhile is there a quick workaround i can do for example using the #cmsimple header="link"# (i know its completely wrong code) im referring to the old way of redirecting pages in cmsimple. can i do this instead of using the page manager params?
Thanks very much once again for you help,
Unfortunately many of my pages link in this way, because i deal with worldwide customers who refer to the same product in 1-10 different names rather than reproducing the same content i just use the h1 tags to hyperlink. for example (i deal with switches not clothes) but in england we refer to trousers as "trousers" whereas some americans refer to them as "pants"
flukey
p.s.
in the meanwhile is there a quick workaround i can do for example using the #cmsimple header="link"# (i know its completely wrong code) im referring to the old way of redirecting pages in cmsimple. can i do this instead of using the page manager params?
RJS Electronics Ltd - LED Push Switches, LCD Programmable Keys, Anti Vandal Push Buttons, Relays, Custom Cable Assemblies
Visit my Web Hosting / Design website here - www.flukedesigns.co.uk
Visit my Web Hosting / Design website here - www.flukedesigns.co.uk
Re: XH Template to XH1.5
Hi Flukey,
But there's a quick workaround available if you keep your redirections in the page_params. Change /plugins/page_params/index.php line 94 from:
to
Christoph
Unfortunately this won't work either. The problem is caused as the search function now evaluates all scripting, so it's possible to search in the output of plugins, e.g. a guestbook. But when any kind of redirection is done by scripting, this code will be evaluated and the relocation happens.flukey92 wrote:in the meanwhile is there a quick workaround i can do for example using the #cmsimple header="link"# (i know its completely wrong code) im referring to the old way of redirecting pages in cmsimple. can i do this instead of using the page manager params?
But there's a quick workaround available if you keep your redirections in the page_params. Change /plugins/page_params/index.php line 94 from:
Code: Select all
$c[$key] = '#CMSimple header("Location:'. $values['header_location'] .'"); exit; #';
Code: Select all
if ($key == $s) $c[$key] = '#CMSimple header("Location:'. $values['header_location'] .'"); exit; #';
Christoph M. Becker – Plugins for CMSimple_XH
Re: XH Template to XH1.5
That is great thanks christoph i will look into it now and check that it works
i thought it might work my way but ah well lol,
also i did at first think it was doing it on purpose, is there anyway to make it so that say if i search for a term specific to one page .ie. contact, it opens up the contact page when clicking search?
flukey
i thought it might work my way but ah well lol,
also i did at first think it was doing it on purpose, is there anyway to make it so that say if i search for a term specific to one page .ie. contact, it opens up the contact page when clicking search?
flukey
RJS Electronics Ltd - LED Push Switches, LCD Programmable Keys, Anti Vandal Push Buttons, Relays, Custom Cable Assemblies
Visit my Web Hosting / Design website here - www.flukedesigns.co.uk
Visit my Web Hosting / Design website here - www.flukedesigns.co.uk